6 Things to Consider Before Installing Rooftop Solar Panels

Going solar is a savvy solution to the multitude of environmental problems caused by greenhouse gases. Solar technology generates sustainable and clean energy and conserves the environment from the harmful effects of carbon emissions. Although initially, conversion to a hybrid solar model does require a significant investment, the solar system starts paying off within three to five years of installation. The Australian government is also offering various rebates and feed-in incentives to cut off the financial burden on solar consumers.

Though solar technology quite effectively converts solar energy into usable power, it is significant to contemplate the following things to maximize the energy output of solar PV systems.

1. Assess Roof Construction Quality

Before investing in a solar PV system, roof construction inspection is mandatory. Various old infrastructures often become weak and susceptible to damage after solar system installation processes, resulting in later inconvenience. So, to avoid any losses, renovate longstanding constructions before solar panel inductions.

2. Roof Setup

Roof location is another vital factor that affects the performance of solar panels. Most of the time, rooftops are open and fully exposed to sunlight – allowing solar panels to produce solar energy at high-efficiency rates. However, murky or covered roofs do not provide that “solar window” to the solar panels, and solar PV systems eventually underperform. Thus, for a favorably sunlit place for solar panels, roof areas must be open and fully exposed to the sun. But, if it is not the case for any solar consumer, they should consider other options, such as movable racking systems to change small angles or opt for community solar modules.

3. Select the Correct Position for Solar Panel Mounting

Correct mounting direction is the critical factor for generating maximum solar energy. So, pursue the following rules of thumb for installing solar panels at various locations:

  • South-facing roofs are perfect in the northern hemisphere regions. The solar modules installed in the south direction get maximum sunlight and enable solar panels to perform at high capacity. 
  • North-facing roofs are excellent in the southern hemisphere areas. The solar panels installed in the north direction get maximum sunlight and enable solar panels to perform at high capacity. 
  • Solar consumers who do not need solar power in the early day hours can install solar panels in a west-facing direction. However, solar users who require solar energy in the morning hours should install solar panels in an east-facing orientation.
  • West and east-facing roofs generally get less sunlight and decrease the solar panel efficiency rates. However, tilting in apt directions and mounting at specific angles can optimize the efficiency rates.  

4. Consider Public Incentives 

In numerous countries, governments provide financial assistance to new solar power consumers. Solar support by the government includes different percentages of rebates depending upon user eligibility and incentives such as investment subsidies that partially cover the solar panel installation costs. However, feed-in tariffs, more popular in Australia, also known as net metering, allow solar consumers to sell their extra-produced solar energy to the government via operating grids at specific rates. Therefore, check your solar rebate eligibility before shifting to solar technology.

5. Calculate Average Power Consumption

Solar panels
Solar panels are nicely placed on the top of the building

Before going hybrid, it is good to comprehend the average power consumption to pick the most suitable solar PV system. Also, new consumers can ask for expert assistance with their power calculations by consulting professional solar PV installers. 

Power estimations help new users to make informed decisions about the required number of solar panels, solar PV system KVAs (a measure of the apparent power of solar systems), what type of inverters and solar batteries will be required, etc.

6. Go for a Professional Solar PV Installer

After all the research and considerations, the final step is to pick a professional solar panel installer. Expert solar PV system installers have the following differentiae: 

  • Must have working permits and clean energy certifications. 
  • They offer proficient evaluations as per consumer-specific situations. 
  • Users can buy solar modules from them as they are authorized dealers of many known brands. 
  • They advise solar consumers about suitable solar technology and installations.
  • They have expert and skilled technicians for solar panel installations. 
  • They ensure professional installations with perfect connections.

Also, certified solar panel installers assist solar users in obtaining updated renewable power incentives and rebates offered by the government.

Wrapping Up

After the disastrous impact of global warming and precarious economic conditions, it is high time to shift to hybrid power solutions. Solar PV systems have the potential to cater to a wide range of energy requirements. Solar power empowers users by facilitating a hybrid electricity module and setting them free from the bonding of the expensive traditional grid power. Therefore, go solar and enjoy reduced electricity bills within a clean, green environment.    

How to Find The Ideal Skilled Plumber Present Near Your Location

Finding a skilled plumber who is well-trained and experienced in doing the plumbing job adequately takes a lot of work these days due to the rise in the number of unfaithful workers who pretend to be good at their jobs but end up causing more harm to the property owner. On the other hand, the more time you take, the more plumbing issue that you are going through could turn into a nightmare for you. Hence, if you find a skilled plumber that is good at their job, make sure you hire them as soon as possible because the number of skilled laborers is very few in this market. 

That is why here in this article, we have referred to a few ways to find a skilled plumber that is good at their job and would ensure their work is to the best of their abilities.

Getting References From Other People

The very first way you can find a skilled plumber would be by asking different people you might know who could have a good reference and are reliable too. For instance, if a plumber has already done their work at a particular house, then asking those people about their work might provide you with some helpful information. Knowing how the plumber conducts their operations throughout the work will help you determine if they are adequately skilled or not for handling your job.

Find A Reputed Company:

You can find many plumbing service-providing companies near your location that provide skilled plumbers at low prices. However, most of these services might be new without experience. Hence, choosing to hire those plumbers might be risky. While working, any difficult problem can put them in a dire situation and end up not solving the problem correctly but can result in a mess in the end. But, if you choose to hire a skilled plumber from a reputed company, they would ensure the workers are adequately trained and well experienced for their respective jobs.

Surfing Different online Websites: 

Another exciting way you can get the contacts of a skilled plumber for your plumbing issues is by surfing through different online plumbing websites. So many plumbing services providing companies have their online websites that will hear your problem and recommend you the best plumbers and services. 

However, before you choose a skilled plumber for your property, it is required to check their reviews properly. If you find the reviews are all positive, then hiring a skilled plumber shouldn’t be a question anymore. 

Check Their License and Work Permit Properly:

When choosing to hire professional plumbing services, one of the first things you should do is ask them to show their licenses or work permit. 

Suppose you saw that the plumber you are looking to employ doesn’t have the proper license to perform the job. It would be best if you refrain from hiring them. 

However, if the plumber is exceptionally experienced at their job and carries proper papers and licenses with them, then hiring those workers might help you solve the problem regarding plumbing seamlessly.

Keep A Close look at The Rate Asked:

Many skilled plumbers out there are charging their clients extraordinary prices that have never been seen before. However, ensure that the rate they choose to charge the customers with is worth paying for the job done by them. Few companies out there offer a chance to hire a skilled plumber that is said to be entirely professional at their job. But before you hire them to carry out your plumbing services, ensure that the rates are adequately charged.

Conducting A Background Check:

A few water pipes are placed in the background of the house

Now the last point through which you can land to a decision of hiring a skilled plumber for your job would be properly checking his or her background such as experience. Suppose the worker has dealt with many similar problems before he or she can solve your problem too.

Use Proper Tools:

Also, ensure that the tools they are supposed to use are perfectly suitable for the work they are carrying out their business. 


These are some of the tips or ways through which you can easily find a reputed company that is offering skilled plumbers at the best possible price available. Moreover, finding a skilled plumber in this conned market is difficult by every means. But, after reading the above article, you can now choose a skilled plumber that is perfectly suitable for the job and knows every skill possible for handling the job at hand.